Configure Basic NAT using CCP

It is very easy to configure NAT using CCP just with few clicks, if you know what you're doing.

Let's start configuring.

Firs off all start CCP and discover yours device (router), then click Configure ->Router -> NAT->Basic NAT  and click button "Launch the selected task".

Next

 
And then you will have to choose which interface is connected to ISP and which to LAN.

 

After choosing continue configuration by click on "Next" and then  "Finish"

 

By clicking "Finish" you will see what configuration will be delivered to a router.

 

Now when I finished with configuration router with NAT, I will test if it works.

On my VM I will make some traffic using Web browser. And as you can see its works, we can see msn.com web page.

 

Now I will connect to a router to see NAT translation.

 As I said its easy, just few clicks.